MIG-280D PLUS
✅Split wire feeder/Built-in wire feeder
✅Function: MIG/MAG/MMA/industrial use/15 kg welding wire
✅Cooling method: air cooling
✅Welding materials: carbon steel, stainless steel, aluminum alloy and other materials
✅Appearance: no gas cylinder frame, equipped with pulleys for easy movement
Product Functions&Features：
1. It has four welding modes: manual welding, ordinary gas shielded welding, high-speed single pulse, and high-speed double pulse.
2. It can store 10 sets of welding programs, with 2T/4T/special 2T/spot welding functions.
3. It can weld non-ferrous metals such as carbon steel, stainless steel, aluminum and its alloys, copper and its alloys.
4. The main feature is the super double pulse welding function of carbon steel, stainless steel, and aluminum alloy.
5. It can perform super double pulse spatter-free welding of aluminum alloy workpieces with a plate thickness of 0.5-6mm. The fish scale pattern formation is close to tungsten inert gas arc welding, and the efficiency is higher than argon arc welding.
| Control Panel |
|
|
| Welding Effect |
 |
Technical Parameters：
| Model | MIG-280D（Split Wire Feeder） | MIG-280D PLUS（Built-in Wire Feeder） |
| Input Power Voltage | AC380V±10% 50Hz 3PH | AC380V±10% 50Hz 3PH |
| Rated Input Capacity | 9.2KVA | 9.2KVA |
| Rated Input Current | 14A | 14A |
| Rated Duty Cycle | 60% | 60% |
| Output Current Range | 50~280A | 50~280A |
| No-load Voltage | 70V | 70V |
| Power Factor | ≥0.93 | ≥0.93 |
| Efficiency | ≥85% | ≥85% |
| Diameter Of Rod | Ø0.8/Ø1.0/Ø1.2/Ø1.6mm | Ø0.8/Ø1.0/Ø1.2/Ø1.6mm |
| Gas Flow | 5~15L/min | 5~15L/min |
| Insulation Class | F | F |
|
Protection Class
|
IP21 | IP21 |
| Machine Dimensions | Welding machine: 545*300*555mm Wire feeder: 660*285*465mm |
Welding machine: 905*445*635mm |
| Machine Net Weight | Welding machine: 48kg Wire feeder: 21kg |
Welding machine: 59kg |
Configuration：
 |
2.5M(L) 3*6mm²+1*4mm² power cable | |
| 2.5M(L) 25mm² ground cable with clamp 300A | ||
| M8*12mm air pipe + 9-16mm pipe clamp (2 pcs) | ||
| Wire feed drive roll: V 0.8-1.0mm、U1.0-1.2mm | ||
| 3M(L) SN24 Euro connection MIG torch (graphite hose inside) | ||
| Gas meter (1PCS) | ||
OEM&ODM：
 |
 |
|
|
