TIG250P AC/DC
✅Multi-function (TIG AC/TIG DC/MMA)
✅Good at welding aluminum and stainless steel
✅IGBT technology
✅Digital control panel, knob control panel
Product Functions&Features：
1.Multifunctional(TIG AC / TIG DC / MMA).
2.Good at welding aluminum and stainless steel.
3.IGBT tech, TIG Inverter argon arc welder produced with international igbt advanced technology.
4.2 panel optional, digital and rotary knob control panel, every parameter can be adjusted accurately.
5.2 steps and 4 steps, pulse and non-pulse functions, which can meet different welding demands.
6.One-key reset in digital panel, recovery machine’s factory setup, easy welding.
7.High frequency arcing, high performance, excellent effect in thin or thick sheet.
8.Every machine equipped with power line, tig torch, ground electrode, power line and air pipe.
9.All machines could work with pedal.
| Control Panel |
|
Digital Control Panel
|
Technical Parameters：
| Model | TIG250P AC/DC |
| Input voltage | 1 phase, 220V |
| Rated output voltage | 20V |
| Rated input Power | 7.1kw |
| No-load voltage | 60V |
| Current adjusting range | 10-250A |
| Up-slope time | 0.1-5s |
| Down-slope time | 0.1-5s |
| Post flow time | 5-25s |
| Start arc current | 10-250A |
| Pulse current | 10-250A |
| Welding current | 10-250A |
| Crater arc Current | 10-250A |
| Pulse width ratio | 0.2-0.8 |
| Pulse frequency(digital) | 0.5-100Hz |
| Clean width | 25%-75% |
| AC frequency | 50-150Hz |
| Duty cycle | 40% |
| Efficiency | 83% |
| Degrees of enclosure protection | 1P21S |
| Packing size | 540*335*600mm |
| Packaging weight | 24.5kg |
Configuration：
 |
1/welding torch: 4m wp-26 air cooled torch |
| 2/electrode holder: 2m 16mm2 welding line with 300A electrode holder | |
| 3/ground wire: 2m 16mm2 ground wire with 300A ground clamp | |
| 4/power line: 2m European power line, equipped with European plug(2*2.5+1) | |
| 5/Air pipe: 2m air pipe |
OEM&ODM：
|
 |
|
|
