MIG-350NW
CO2 Welding Machine
Ordinary carbon dioxide welding machine
✅Split wire feeder
✅Industrial use, IGBT module, Flux cored(gasless)wire compatible
✅Function: CO2/MIG/MAG/MMA
✅Cooling method: water cooling
✅Welding material: Suitable for thick plates above 0.8mm carbon steel, alloy steel, mild steel
Ordinary carbon dioxide welding machine
✅Split wire feeder
✅Industrial use, IGBT module, Flux cored(gasless)wire compatible
✅Function: CO2/MIG/MAG/MMA
✅Cooling method: water cooling
✅Welding material: Suitable for thick plates above 0.8mm carbon steel, alloy steel, mild steel
Product Functions&Features：
1. Suitable for welding of carbon steel, alloy steel and mild steel with thick plates over 0.8mm;
2. Split wire feeder, simple operation, economical and practical;
4. Fast welding speed and high arc initiation success rate;
5. Adopting advanced IGBT-20KHZ inverter technology, with strong reliability, high efficiency and energy saving, light weight and small size;
6. Automatic compensation for grid voltage fluctuation and stable current;
7. Small spatter, deep molten pool and good weld formation.
| Control Panel |
|
|
| Welding effect |
  |
Technical Parameters：
| Model | MIG-280N（Air-Cooling） | MIG-350N（Air-Cooling） | MIG-350NW（Water-Cooling） |
| Input Power Voltage | AC380V±10% 50Hz 3PH | AC380V±10% 50Hz 3PH | AC380V±10% 50Hz 3PH |
| Rated Input Current | 9.2KVA | 13.3KVA | 13.3KVA |
| Rated Input Current | 14A | 18.8A | 18.8A |
| Rated Duty Cycle | 60% | 60% | 60% |
| Output Current Range | 50~280A | 60~500A | 60~500A |
| No-load Voltage | 50V | 65V | 65V |
| Power Factor | ≥0.93 | ≥0.93 | ≥0.93 |
| Efficiency | ≥85% | ≥85% | ≥85% |
| Diameter Of Rod | Ø0.8/Ø1.0/Ø1.2mm | Ø0.8/Ø1.0/Ø1.2mm | Ø0.8/Ø1.0/Ø1.2mm |
| Gas Flow | 5~15L/min | 5~15L/min | 5~15L/min |
| Insulation Class | F | F | F |
| Protection Class | IP21 | IP21 | IP21 |
| Machine Dimensions |
Welding machine：545*305*545mm |
Welding machine：690*330*629mm |
Welding machine：970*475*908mm |
| Machine Net Weight |
Welding machine：36kg |
Welding machine：68kg Wire feeder：15kg |
Welding machine：68kg Wire feeder：15kg |
Configuration：
 |
2.5M(L) 3*4mm²+1*2.5mm power cable | |
| 2.5M(L) 25mm²ground cable with clamp 300A | ||
| M8*12mm gas hose+9-16mm hose clamp (2PCS) | ||
| 3M(L) SN501 Euro connection MIG torch (graphite hose inside) | ||
| Gas meter (1PCS) | ||
OEM&ODM：
|
 |
|
|
